Cart is empty
Beeprog Universal Eprom Programming System
Hover or click the image
Beeprog Universal Eprom Programming System
It is important to remember, that a support of most of the new devices requires only a software update, because the BeeProg+ is truly a universal programmer. With our prompt service you can have new device added to the list of supported devices within hours! See AlgOR (Algorithm On Request) service for details.
Free software updates
Keep-Current and AlgOR services, our next step towards customer satisfaction.
Keep-Current service means, that ELNEC ships the latest version of programmer software and updated user documentation (Keep-Current package) to customer . The Keep-Current service is your hassle-free guarantee that you achieving the highest quality programming on ELNEC programmers, at minimal cost.
AlgOR (Algorithm On Request) service gives the user a tool to influence amount and types of programmed devices as needed.
Advanced design of the BeeProg+ programmer, including protective circuits, original brand components, and careful manufacturing and burning allows us to provide a three-year warranty on parts and labor for the programmer (limited 25 000-cycle warranty on ZIF sockets).
SpecificationHARDWAREBase unit, DACs
* USB 2.0 port
* FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
* on-board intelligence: powerful microprocessor and FPGA based state machine
three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
* VCCP range 0..8V/1A
* VPP1, VPP2 range 0..26V/1A
* autocalibration
* selftest capability
* protection against surge and ESD on power supply input, parallel port connection
ZIF socket, pindriver
* 48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 48-pin
* pindrivers: 48 universal
* VCCP/VPP1/VPP2 can be connected to each pin
* perfect ground for each pin
* FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
* analog pindriver output level selectable from 1.8 V up to 26V
* current limitation, overcurrent shutdown, power failure shutdown
* ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
* continuity test: each pin is tested before every programming operation
* ISP connector
* 10-pin male type with missinsertion lock
* 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
* 1x VCCP voltage (range 2V..7V/100mA), can be applied to pins 1, 3
* programmed chip voltage (VCCP) with both source/sink capability and voltage sense
* 1x VPP voltage (range 2V..25V/50mA), can be applied to pins 2,3,4,6,8,10
* target system supply voltage (range 2V..6V/250mA)
DEVICE SUPPORTProgrammer, in ZIF socket
* EPROM: NMOS/CMOS, 2708*, 27xxx and 27Cxxx series, with 8/16 bit data width, full support for LV series
* EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width
* Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, from 256Kbit to 32Mbit, with 8/16 bit data width, full support for LV series
* Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx series, full support for LV series
* Configuration (EE)PROM: XCFxxx, XC17xxxx, XC18Vxxx, EPCxxx, AT17xxx, 37LVxx
* 1-Wire E(E)PROM: DS1xxx, DS2xxx
* PROM: AMD, Harris, National, Philips/Signetics, Tesla, TI
* NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
* PLD: Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX7000AE
* PLD: Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA, ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, LC4xxxB/C/V/ZC, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-xx/xx
* PLD: Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
other PLD: SPLD/CPLD series: AMI, Atmel, AMD-Vantis, Gould, Cypress, ICT, Lattice, NS, Philips, STM, VLSI, TI
* Microcontrollers 48 series: 87x41, 87x42, 87x48, 87x49, 87x50 series
* Microcontrollers 51 series: 87xx, 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, all manufacturers, Philips LPC series
* Microcontrollers Intel 196 series: 87C196 KB/KC/KD/KT/KR/...
* Microcontrollers Atmel AVR: AT90Sxxxx, ATtiny, ATmega series
* Microcontrollers Cypress: CY8Cxxxxx
* Microcontrollers ELAN: EM78Pxxx
* Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, dsPIC series
* Microcontrollers Motorola: 68HC05, 68HC08, 68HC11 series
* Microcontrollers National: COP8xxx series
* Microcontrollers NEC: uPD78Pxxx series
* Microcontrollers Scenix (Ubicom): SXxxx series
* Microcontrollers SGS-Thomson: ST6xx, ST7xx, ST10xx series
* Microcontrollers TI: MSP430 and MSC121x series
* Microcontrollers ZILOG: Z86/Z89xxx and Z8xxx series
* Microcontrollers other: EM Microelectronic, Fujitsu, Goal Semiconductor, Hitachi, Holtek, Princeton, Macronix, Winbond, Infineon(Siemens), NEC, Samsung, Toshiba, ...
Programmer, through ISP connector
* Serial E(E)PROM: IIC series
* Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny, ATmega series
* Microcontrollers Cypress: CY8C2xxxx
* Microcontrollers Elan: EM78Pxxx
* Microcontrollers EM Microelectronic: 4 and 8 bit series
* Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, * PIC18xxx, dsPIC series
* Microcontrollers Motorola/Freescale: HC08 GT, LJ, QY, QT series
* Microcontrollers Philips: LPC series
* Microcontrollers TI: MSP430
* PLD: Lattice: ispGAL22xV10x, ispLSI1xxxEA, ispLSI2xxxE,
* ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, M4-xx/xx, M4LV-xx/xx, M4A3-xx/xx, M4A5-xx/xx, LC4xxxB/C/V/ZC
* Various PLD (also by JAM player/JTAG support):
* Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX 9000, MAX II
* Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
Notes:
devices marked * are obsolete, programming with additional module
for all supported devices see actual DEVICE LIST
* I.C. Tester
* TTL type: 54,74 S/LS/ALS/H/HC/HCT series
* CMOS type: 4000, 4500 series
* Static RAM: 6116 .. 624000
* User definable test pattern generation
* Package support
* package support includes DIP, PLCC, SOIC, PSOP, SSOP, TSOP, TSSOP, TQFP, QFN (MLF), SDIP, BGA and other
* support all devices in DIP with default socket
* support devices in non-DIP packages up to 48 pins with universal adapters
* programmer is compatible with third-party adapters for non-DIP support
Programming speedNotes:
It is important to know, we always use random numbers pattern for programming speed testing. Some our competitors use "sparse" pattern, where only few non-Blak data are programmed or are there are used data with only few 0 bits (FE, EF, etc.). This cheating approach can "decrease" programming time considerable. If you plan to compare, ask always which pattern they use.
The programming speed depends on PC speed only slightly.
If the programmer attached to PC through LPT port, the programming might take longer.
Device Size [bits] Operation Time
AT29C040A (parallel Flash) 80000Hx8 (4 Mega) programming and verify 21 sec.
AM29DL323DB (parallel Flash) 208000Hx16 (32 Mega) programming and verify 38 sec.
AM29DL640 (parallel Flash) 400080Hx16 (64 Mega) programming and verify 76 sec.
AT45D081 (serial Flash) 108000Hx8 (16 Mega) programming and verify 43 sec.
AT89C51RD2 (microcontroller) 10000Hx8 programming and verify 15 sec.
PIC18LF452 (microcontroller) 4000Hx16 programming and verify 4 sec.
Conditions: P4, 2.4 GHz, USB 2.0, Windows XP.
Algorithms: only manufacturer approved or certified algorithms are used. Custom algorithms are available at additional cost.
Algorithm updates: software updates are available approx. every 2 weeks, free of charge.
Main features: revision history, session logging, on-line help, device and algorithm information.
Device operations
standard:
* intelligent device selection by device type, manufacturer or typed fragment of * part name
* automatic ID-based selection of EPROM/Flash EPROM
* blank check, read, verify
* program
* erase
* configuration and security bit program
* illegal bit test
* checksum
* interprete the Jam Standard Test and Programming Language (STAPL), JEDEC standard JESD-71
* interprete the VME files compressed binary variation of SVF files
security
* insertion test, reverse insertion check
* contact check
* ID byte check
special
* production mode (automatic start immediately after device insertion)
* auto device serial number increment
* statistic
* count-down mode
* Buffer operations
* view/edit, find/replace
* fill/copy, move, byte swap, word/dword split
* checksum (byte, word)
* print
* File load/save
* no download time because programmer is PC controlled
* automatic file type identification
Supported file formats
* unformatted (raw) binary
* HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII- SPACE-HEX
* Altera POF, JEDEC (ver. 3.0.A), eg. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer ISDATA, etc.
* JAM (JEDEC STAPL Format), JBC (Jam STAPL Byte Code), STAPL (STAPL File) JEDEC standard JESD-71
* VME (ispVME file VME2.0/VME3.0)
* GENERALPC system requirements
* Common, software related requirements
* Programmer hardware related requirements:
* either one USB port, 2.0 compatible
* or one (parallel) printer port with nothing attached, the IEEE 1284 compatible printer port (ECP/EPP) on PCI bus recommended
Operation
* operating voltage 15V..18V DC, max. 1A
* power consumption max. 12W active, about 2W sleep
* dimensions 160x190x42 mm (6.3x7.5x1.7 inch)
* weight (without external adapter) 0.9kg (1.98 lb)
* temperature 5????C ???? 40????C (41????F ???? 104????F)
* humidity 20%..80%, non condensing
* Package includes
* BeeProg+ programmer
* switching power adapter 100..240V AC/15V DC/1A
* connection cable PC-programmer, LPT port
* connection cable PC-programmer, USB port
* ISP cable
* diagnostic POD for selftest of the programmer
* anti-dust cover for ZIF socket
* user manual
* software
* registration card
* transport case
As a authentic Cars tools wholesaler and dropshipper, we promise to provide the best products and best service, we also wholesale and dropshipping other cars tools in these categories:Auto Diagnostic Tools,GPS, Car DVD & LCD Monitors, Digital TV Tuners/Receivers, Xenon HID Conversion Kit
Car Lights, Rear View Camera, Parking System, Car Alarm, Motorcycle Alarm System, Spare Tyre Cover
Interior, Locking System, Car FM Transmitters, Exterior...
Looking for more Beeprog Universal Eprom Programming System drop ship images and reviews, please check our Cars tools blog.
No questions found
Ask a question
- Shipping & Delivery Information
- Our official shipping couriers are: DHL, UPS, FedEx, USPS, HongKong Registered Airmail and China EMS.
- At Ownta.com, shipping and handling charges are based on the order total weight and delivery destination.
- We usually ship this item to worldwide within 1 - 2 business days once we confirmed your payment.For Special situation, please check your email for our customer service notification.
- Duty & tax (custom charges), handling fee, service cost and storage, are EXCLUDED from the total amount you are paying for shipping cost. For tax and duty charges, it is advisable that you refer to your local custom authorities as they could provide you the updated rates charges for imports to your country destination.
Ownta.com will not be responsible for any extra charges incurred by the courier company or the local custom, to get your package delivered to you. Customers responsible for all custom charges before the release of parcels from the local custom office. - If your package is stuck at the custom, please contact your local custom or the local courier in your area and quote them your tracking number. Do inquire them on what is necessary to provide for your package to be release. If you require any documents such as invoice, please do inform us and we will provide it to you.
- It is always advisable that you check with your local custom on the regulations and policy applied as it may varies from country to country. They are able to provide an updated regulations and i-Pmart will not be responsible for losses or damages if the package being confiscated as purchases will be done at customer's own risk & responsibility. It is the responsibility of customer to make sure that your order contains acceptable and approved items for import into the country of destination/delivery.
- Tracking number will email to you after order ship out.
- We recommend to ship by DHL and UPS, delivery will be fast in 3 - 5 business days.
- If you want save shipping cost, you can choose USPS and HongKong Registered Airmail, it will takes about 7 - 10 business days. Its parcel will delivery by USPS in USA.
- Shipping cost calculated based on per 0.5kg, so, if your order total weight not achieve to next 0.5kg level, you can add more items without to pay extra shipping cost.
- We use USPS and HongKong Registered Airmail to delivery to PO Boxes.
- You'll see your shipping cost listed on the "Place Order" page in Checkout before you submit your order. After reviewing the page, you can submit your order.
This item can ship to these countries and areas:
|
|
|
- Payment Information & Details
- We recommend Paypal payment methods to all our customers, it is fast and safe.
- Other payment methods contains: Wire Transfer (Bank Of China, HSBC), Moneybooker, WesternUnion, MoneyGram.
- We don't collect your paypal account information when you checkout, your transaction is safe, because the pay transaction is do on paypal official site.
- Installment payments are not acceptable. All orders have to be paid in full before the process of shipment to your country destination.
- Your transaction is safe and protected. We use HackerSafe and Trustwave to protect your data, you can view our privacy policy from here.
- We don't accept pay by credit card directly, you can use paypal to do credit card transactions.
- You can use Paypal Mass Pay for your order and please seek the advise of your paypal account manager on how to make payment by Paypal Mass Pay.
- If you have choose to make payment for your orders by Bank Transfer, Western Union or Money Gram, you are required to fill online electronict payment form as details below to enable us to find your incoming payment: http://www.ownta.com/electronict-payment-form.html
- We will confirm your Paypal payment within 24 hours, for Bank Transfer payment, it usually takes 3 business to confirm.
- Once we confirmed your payment, we will ship out your order within 24 hours.
- New Free Shipping Information & Details
- Free shipping applies to select items at Ownta.com as indicated on the product description page. Look for the “free shipping” logo on qualifying items. Free shipping offer valid for HongKong Registered Mail,USPS, EMS,DHL and UPS shipping methods to all around the world. Free shipping offers expire on date listed below or while supplies last.
- If you qualify for FREE Shipping but your order also contains one or more ineligible items, you'll be charged shipping fees for those ineligible items.
- Free Shipping courier is depends on the "free shipping" logo on product details page.
- Free Shipping may slower than Express Delivery, the expected delivery time may takes about 10 - 25 business days.
- If you want to get fast delivery, you can choose the Express Delivery Option on product details page.
- We reserve the right to change or discontinue FREE Shipping at any time.
