Cart is empty
Tai'An Puhui T-962A Reflow Oven Reflow Soldering Machine
Hover or click the image
Tai'An Puhui T-962A Reflow Oven Reflow Soldering Machine
The Tai'An Puhui T-962A is a micro-processor controlled reflow oven. The device is powered by standard 110VAC 50/60HZ (220VAC Model is available). User interface is implemented by way of Tai'An Puhui T-962A input keys and an LCD display. Pre-Set heating Modes are selected by user interaction with thermal cycle progress observed on LCD display.This self-contained reflow station allows safe soldering techniques and the manipulation of SMD, BAG and other small electronic parts mounted on a PCB assembly. The Tai'An Puhui T-962A may be used to automatically “re-flow” solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.A windowed drawer is designed to hold the work-piece. Thermal cycle accuracy is maintained by closed loop micro-computer control with infrared heaters, thermocouple and circulating air.The Tai'An Puhui T-962A is simple to use, the soldering process is completely automatic defined by pre-defined thermal cycles.
Tai'An Puhui T-962A Reflow Oven Reflow Soldering Machine features:
- The Tai'An Puhui T-962A is a self-contained Micro-Processor controlled IC Heater and solder rework station.
- Uses up to 1500 watts of energy efficient Infrared heating and air circulation to re-flow solder in a large 300×320mm area.
- Parameters of Eight (8) Soldering cycles are Pre-Defined
- Soldering cycles are keypad selected and progress displayed on the Tai'An Puhui T-962A LCD.
- A single windowed drawer holds assemblies within the heating chamber,
- The Tai'An Puhui T-962A design is ergonomic, practical and easily operated.
- The entire soldering process is completes automatically from Preheat, Soak and Reflow through cool- down.
- The Tai'An Puhui T-962A design is ergonomic, practical and easily operated.
- The Tai'An Puhui T-962A is an economical rework solution from single runs to on-demand small batch production.
- Light weight and a small footprint allows the Tai'An Puhui T-962A to be easily bench positioned transported or stored.
- The Tai'An Puhui T-962A can solder most bosseyed or double-face PCB boards’ small parts, ie.: CHIP, SOP, PLCC, QFP, BGA etc; Can be used to the gum of the product solid, turning the circuit board hot aging, maintaining the PCB board and so on. Be satisfied to the needs of ”academe”, “smallorder run” and “extensively development of enterprise & company”.
Technical Parameter:
| Supply Voltage | AC110V/ 50Hz AC220V /60Hz |
| Putout Power | 1500W |
| Maximum Soldering Area | 300×320 mm |
| Temperature Range | 100℃-350℃ |
| Cycle Time | 1ï½ΕΎ8 min |
Parts Inventory:
| Description | Quantity | Illustration |
| Tai'An Puhui T-962A Main Assembly | 1 | |
| Power Cable 110VAC or 200VAC | 1 | |
| 5mm Fuse, 10A 250VAC Fast Blow (Spare) | 1 | |
| This Manual on CD | 1 |
Tai'An Puhui T-962A Initial Set-Up and adjustments:
- Place the Tai'An Puhui T-962A on an appropriate level, insulated work area.
- Make Sure the work space is well ventilated (exhaust fans may be necessary),
- Allow at least 20mm between the Tai'An Puhui T-962A and its surroundings for heat protection.
- Confirm the Work drawer opens and closes smoothly and without obstruction
- Locate supplied universal power cord and connect same from rear apron to AC power.
- Locate and press the power on button, the LCD will light, the Tai'An Puhui T-962A will log on.
Press “s” button, the main menu will appear on LCD.
Press “F4” to Select English Menu
In the main menu,Press “F3” button selection different temperature wave. Example select wave1
Press “F3” button again, can see parameter about you choose the temperature wave:
Select: soldering paste sort, soldering temperature, time etc.
When selections are complete, then Press “F4” button to return previous page. Press the temperature wave that the”F1” key carries out to make selection automatically.
When it is ending, the work will shut down automatically, and the warning buzzer is working.
In the main menu page, press “ F2”button by handcraft operation：
Press “F1” button to start cooling, Press F1/S key again to stop. Press “F2” button to start heat up, Press F2/S key again to stop.
Wave Cycle Select:
â‘ Press the “S” button to select operational interface after switch on, press the “F4” to select a different language category.
â‘¡ Following we provide eight different waves, please choose one according to your request. Press the F1/F2 to choose different wave, press F3 to look into different wave parameter, press 4 to confirm the wave you chose
Wave one, use the same with 85Sn/15Pb 70 Sn/30Pb
Wave two, use the same with 63Sn/37Pb 60 Sn/40Pb
Wave three, use the same with Sn/Ag3.5; Sn/Cu 75 Sn/Ag4.0/Cu.5
Wave four, use the same with Sn/Ag2.5/Cu.8/Sb.5; Sn/Bi3.0/Ag3.0
Wave five, use the same with The red gum standard is solid to turn temperature wave,Heraeus PD955M.
Wave six & seven & egiht, use the same with The PCB circuit board returns to fix etc.
Wave seven & egiht, use the same with the wave cycle set-up by yourself.
Press “s” button to the temperature page,
Press F1/F2 button, ahead/ backwards select different time. Press F3/F4 button ,up/down to select different temperature, Press “s” button to save.
When save finish, press “F4” button to select the temperature wave. Press “S” button to repetition.
Operating instructions:
- (1) Lightly puts the product which will be processed in the drawer of the oven on the stage , Close drawer, Press F1 to switch on, The automatic performance make selection of heat wave, Show current performance time, the enactment temperature and temperature on the LCD screen, and automatically note the formed wave of the temperature.
- (2) The whole process is in your supervision, you may see it by the window of the drawer, and you may see the data from the LCD screen. If the wave doesn’t achieve your request, please modify the data by yourself.
- (3)The pre-set up wave cycle is according to the temperature that the different solder paste needs. You can pre-set up other wave cycle according to your needs.
- (4) In the process, you can press “S” to force to stop; When finished, the exhaust fan will work automatically to cool, you also can force to turn on the exhaust fan.
- (5) Complete the soldering, if somewhere is faulty, you can sold it automatically again, or you can sold it manual.
Operation Suggestions:
- (1) To satisfy the need of soldering both sides of the PCB, there is a particular designed fan duct in the machine. When the both sides of the PCB are of large difference in temperature, it can sold the patch in one side, and in the same time, it can keep another side of the PCB as well. To satisfy the soldering of the small board, please pre-put a PCB board in the size of 10cm*10cm,when soldering the small board and the solder-ball. It will make the soldering effect very well.
- (2) When use the machine, please pre-heat it if the environment is of low temperature, too humidity. The method: after choosing the wave cycle, run the machine with nothing in the drawer at the first time.
- (3) Attention: The machine can’t be used to soldering the chips( the chips which with metal encapsulation are of strong glisten),and the “plastic plug in board” which can’t be able to bear the temperature of 250degree centigrade.
- (4)About the method to measure the temperature of the machine: Use the standard weatherglass. Fix the probe on the face of the PCB board(make sure it is the face ),then put the PCB board into the drawer, close the drawer. And then you will get the actual temperature.
Maintenance:
- Keep the inside of the machine clear. Please do as follows:When used the machine several times, please turn on the “heat-up” and the “exhaust fan” two or three minutes handly, to make the flux remained in the machine volatilization. It will keep the inside of the machine cleanness, and make the function of the machine stabilization.
- Clean the drawer observation glass as necessary.
Warning !
- Make sure the power supply is connect with earth.
- Do not turn off the switch at once after using, make sure the machine is cooling, and then turn off the switch and cut the power supply.
- There isn’t any way to do smoke evacuation, please put the machine in a ventilated condition to avoid poisoning(when the solder paste volatilization).
- The insulations in the machine had been treated strictly. Do not take apart the machine until there is any safety precautions.
As a authentic soldering tools wholesaler and dropshipper, we promise to provide the best products and best service, we also wholesale and dropshipping other soldering tools in these categories:Infrared Welding Systems,Testing Instrument,Pre-Heater,Reflow Soldering Machine,Hot Air Gun,Solder series,Hot Air Gun Nozzles,Soldering Iron Tips,BGA Reball Soldering,BGA Reball Kit,Soldering Ball,Soldering BGA Net,Soldering Pot,Working Stand,Smoke Absorber Fan,Microscope & Accessories,Knife,Pliers,Wrench,Tweezer,PCB Holder,Screwdriver,Cleaning Tools,MCU Extractor,Power Supplies,Measuring Tools,Magnifying Lamp,Glue / Adhesive Tape,Vacuum Pickup Devices,Phone Opening Tools,Clips,Vise,Wire,Brush,Glove,Marker,Drill Set,IC Pill Case,Flux & Paste,Solder Assist,Needle System,Soldering Sponge,Rosin Core Solder,Weighting Devices,Anti-Static Wrist Strap,Magnetizer and Demagnetizer Tools...
Looking for more Tai'An Puhui T-962A Reflow Oven Reflow Soldering Machine drop ship images and reviews, please check our soldering tools blog.
TAI'AN PUHUIwholesale-dropshipping-taian-puhui-repairing-tools-products<p>TAI'AN PUHUI product involves high&low pressure electric appliance and its the complete set product, the industry electricity automation control, the frequency conversion, conserves energy the electric appliance, the intelligence electronic products, the electronic tool and so on the multi- classes, multi-disciplinary.</p>
No questions found
Ask a question
- Shipping & Delivery Information
- Our official shipping couriers are: DHL, UPS, FedEx, USPS, HongKong Registered Airmail and China EMS.
- At Ownta.com, shipping and handling charges are based on the order total weight and delivery destination.
- We usually ship this item to worldwide within 1 - 2 business days once we confirmed your payment.For Special situation, please check your email for our customer service notification.
- Duty & tax (custom charges), handling fee, service cost and storage, are EXCLUDED from the total amount you are paying for shipping cost. For tax and duty charges, it is advisable that you refer to your local custom authorities as they could provide you the updated rates charges for imports to your country destination.
Ownta.com will not be responsible for any extra charges incurred by the courier company or the local custom, to get your package delivered to you. Customers responsible for all custom charges before the release of parcels from the local custom office. - If your package is stuck at the custom, please contact your local custom or the local courier in your area and quote them your tracking number. Do inquire them on what is necessary to provide for your package to be release. If you require any documents such as invoice, please do inform us and we will provide it to you.
- It is always advisable that you check with your local custom on the regulations and policy applied as it may varies from country to country. They are able to provide an updated regulations and i-Pmart will not be responsible for losses or damages if the package being confiscated as purchases will be done at customer's own risk & responsibility. It is the responsibility of customer to make sure that your order contains acceptable and approved items for import into the country of destination/delivery.
- Tracking number will email to you after order ship out.
- We recommend to ship by DHL and UPS, delivery will be fast in 3 - 5 business days.
- If you want save shipping cost, you can choose USPS and HongKong Registered Airmail, it will takes about 7 - 10 business days. Its parcel will delivery by USPS in USA.
- Shipping cost calculated based on per 0.5kg, so, if your order total weight not achieve to next 0.5kg level, you can add more items without to pay extra shipping cost.
- We use USPS and HongKong Registered Airmail to delivery to PO Boxes.
- You'll see your shipping cost listed on the "Place Order" page in Checkout before you submit your order. After reviewing the page, you can submit your order.
This item can ship to these countries and areas:
|
|
|
- Payment Information & Details
- We recommend Paypal payment methods to all our customers, it is fast and safe.
- Other payment methods contains: Wire Transfer (Bank Of China, HSBC), Moneybooker, WesternUnion, MoneyGram.
- We don't collect your paypal account information when you checkout, your transaction is safe, because the pay transaction is do on paypal official site.
- Installment payments are not acceptable. All orders have to be paid in full before the process of shipment to your country destination.
- Your transaction is safe and protected. We use HackerSafe and Trustwave to protect your data, you can view our privacy policy from here.
- We don't accept pay by credit card directly, you can use paypal to do credit card transactions.
- You can use Paypal Mass Pay for your order and please seek the advise of your paypal account manager on how to make payment by Paypal Mass Pay.
- If you have choose to make payment for your orders by Bank Transfer, Western Union or Money Gram, you are required to fill online electronict payment form as details below to enable us to find your incoming payment: http://www.ownta.com/electronict-payment-form.html
- We will confirm your Paypal payment within 24 hours, for Bank Transfer payment, it usually takes 3 business to confirm.
- Once we confirmed your payment, we will ship out your order within 24 hours.
- New Free Shipping Information & Details
- Free shipping applies to select items at Ownta.com as indicated on the product description page. Look for the “free shipping” logo on qualifying items. Free shipping offer valid for HongKong Registered Mail,USPS, EMS,DHL and UPS shipping methods to all around the world. Free shipping offers expire on date listed below or while supplies last.
- If you qualify for FREE Shipping but your order also contains one or more ineligible items, you'll be charged shipping fees for those ineligible items.
- Free Shipping courier is depends on the "free shipping" logo on product details page.
- Free Shipping may slower than Express Delivery, the expected delivery time may takes about 10 - 25 business days.
- If you want to get fast delivery, you can choose the Express Delivery Option on product details page.
- We reserve the right to change or discontinue FREE Shipping at any time.
No posts found
New post
