Hot Air BGA Reworking Station with Three Temperature Zones Infrared with CCD Camera and Monitor

SOAAbga23
In stock

Hot Air BGA Reworking Station with Three Temperature Zones Infrared with CCD Camera and Monitor

$3,829.83
+
Add to wish list
 









Hot Air BGA Reworking Station with Three Temperature Zones Infrared with CCD Camera and Monitor


Specifications:

  • PCB repair equipment
  • It can rework any chips rapidly
  • HD camera system; 
  • Positioning accuracy. 
  • CE certificate
  • Total Power 4800W
  • Top heater 800W
  • Bottom heater 2nd heater 1200W,3rd IR heater 2700W
  • Power supply Only AC220V±10% 50/60Hz,no 110V version
  • Dimension 635×600×560mm
  • Positioning V-groove, PCB support can be adjusted in any direction with external universal fixture
  • Temperature control (K Sensor) closed loop, independent heating, precision within ±3°
  • PCB size Max 410×370mm Min 20×20 mm
  • Electrical selection Highly sensitive temperature control module+Touch screen (Taiwan)+Delta PLC


Main Features:

  • The machine used touch-screen interface and PLC control to show the three temperature graphs at any time, so that the temperature error can be controlled within 1°.
  • Have 7 temperature sections for control such as preheating, insulation, heating, welding 1, welding 2, cooling and refrigeration. The excellent temperature control system ensures the effectiveness of welding.
  •  It can save 1 to 100 groups of graph parameters at one time. It can analyze the graphs and change the settings at any time on the touch screen.
  • There are three independent heating areas from top to bottom. the first and second temperature areas can control many groups & sections of temperature parameters at the same time. The third area preheats the PCB thoroughly to achieve the best welding effect. Temperature, time, slope, cooling and alarming all display on the touch screen.
  • Choose imported high-precision K-Sensor with closed-loop to detect up/down temperature precisely.
  •  After finishing desoldering & soldering, there is an alarming. When the temperature goes beyond control, the electric circuit can cut off automatically, with over-heating protection.
  • Use a powerful cross-flow fan to cool PCB rapidly to prevent it from deformation and ensure the welding effect.
  • Use a V-groove equipped with a flexible fixture for PCB positioning to protect the PCB.
  • For large thermal capacity of PCB/CSP or other high-temperature lead-free requirements, all  can be handled easily.
  • The hot air nozzle can rotate 360 ° freely and it's easy to replace. Offering BGA nozzles of different sizes for you to replace easily. Nozzles of special requirements are customizable.
Package Included:
  • 1 x Hot Air BGA Reworking Station complete Set

No posts found

Write a review